 |
No Power, no function |
| |
Set the power switch to ON on the LCD panel. The LED will light up on the front of the panel.
Make sure the power cord in the back of the panel is securely connected into a power outlet.
Check the power source using another electrical device to make sure the power source is supplying sufficient voltage. |
|
Power on but no video |
| |
Make sure the video cable supplied with the panel is tightly secured to the video card in the computer.
Check the power-saving mode, click a button or move the mouse to end the power-saving mode
Under circumstances modern graphic cards have several signal output options . Please test this by sticking the signal cable in the additional output and check if it is functioning.
Please check the socket of the signal cable of the monitor. If the pins are bent or lost, please contact the dealer.
Please refer to your manual whether you need a special adapter socket |
|
Colour problems |
| |
Please check the signal cable to make sure that it is connected correctly to the monitor as well as to the graphic card in case a specific colour is missing.
Please check the socket of the signal cable of the monitor. If the pins are bent or lost, please contact the dealer.
Test the Monitor by connecting it to a different computer. |
|
Scrolling Image |
| |
Make sure the video input signals are within the monitor's specified frequency range.Try the monitor with another power source and/or computer system. Connect the video cable securely. |
